Facilitation Tools
Facilitation Tool Best Use
=========== ==========
Brainstorming Many ideas are needed in a short period of time.
Team input is important.
Ideas need to be generated prior to using other tools.
Nominal Group Technique Involvement from all team members is needed.
A new assignment is beginning.
Rank Ordering Alternatives must be narrowed down in number.
Force-Field Analysis Driving and restraining forces to change need to be identified.
Cause-and- Effect Diagram (Fishbone) Various causes of a particular problem need to be identified. The relationships among the causes need to be visualized.
Storyboarding The problem, process, or possible solution should be visualized.
Small Groups Increased involvement is needed. Multiple issues need to be solved in a minimum amount of time.
Data Gathering Information about the current situation is needed.
Results of efforts need to be evaluated.
Brainstorming
Brainstorming appeals to facilitators because it:
? Encourages a high degree of involvement by participants
? Gets the energy of the team flowing
? Requires few props (a flip-chart and markers)
? Allows a lot to be accomplished in a short period of time
? Can be fun
Successful brainstorming efforts follow these steps:
1. Explain the purpose of the session. What's the issue to be addressed or the problem to be discussed?
2. Set up a flip-chart and select another person to be the recorder. If a lot of ideas are anticipated, consider using multiple flip-charts and multiple recorders.
3. Write the issue or problem to be discussed on a flip-chart page or marker board where everyone can see it.
4. Review the following ground rules:
a. Specify time restraints.
b. Explain that the goal is to go for a quantity of ideas—not quality at this stage.
c. Encourage people to free-wheel and not to hold back. Sometimes the crazier the ideas sound, the better.
d. Do not evaluate, make judgments, or criticize what someone says.
e. Explain that it is okay to ask questions to clarify, but not to debate.
f. When silence occurs, wait and then continue. Many good ideas will flow after people get a second wind.
5. Conduct the brainstorming session and stick to the ground rules. When the time limit has been reached, call the session to a halt.
6. Review and combine ideas. Only at this point is it okay for participants to become more discerning about the quality of the ideas that have been suggested. Go back through each idea and eliminate unrealistic or incompatible ideas. Assign some kind of label to the other ideas. For example, use an "M" for ideas that "may be" considered; use an asterisk for the ones that definitely are to be considered.
7. Review the ideas that are left and combine those that are similar.
8. The last step depends on the objective. In some cases, the team may develop an action plan based on the ideas that have been generated. In other cases, the ideas may be turned over to another team or a smaller work team who has the responsibility of using the ideas.
The Nominal Group Technique
The nominal group technique is related to brainstorming and is used when facilitators want to ensure involvement from all team members. It is a useful technique at the beginning of a facilitation assignment when participants can be reluctant to express themselves because they are not yet comfortable with their role in the process. The nominal group technique can also be used to prepare the team for full-scale brainstorming or prior to using rank ordering.
The nominal group technique involves these steps:
1. Identify the topic, issue, or problem to be addressed.
2. Have participants write their ideas about the topic on a piece of paper, in private, without consulting other participants. You can direct them to write down a specific number of ideas or ask them to write down as many as they can think of at the time.
3. Go around the room and ask each participant, in round-robin fashion, to give one idea.
4. Each person must share an idea unless it has already been given by someone else. In this case the participant would "pass."
5. Record the ideas on the flip-chart as they are given.
6. Allow no discussion or debate of the ideas at this point.
7. Continue in a round-robin manner until all ideas have been given.
8. Once all the participants have given their ideas, either stop the process (if no more information is needed) or open it up for more discussion by using brainstorming.
Rank Ordering
Rank ordering is a tool that can help a facilitation team sort through a great deal of information and identify the priorities. The process involves taking one or more votes to narrow the number of options for the team. As the rank-order process continues, the items that are most important to the team begin to emerge and the less important items are eliminated. Facilitators might use rank ordering immediately after a brainstorming session. For example, the team has generated many good ideas, but they can only act on a few. Rank ordering allows the team to identify the critical few that need to be addressed.
Rank Ordering works like this:
1. Determine how many items or priorities need to be selected. Is the objective to select only one item, the top three choices, or some other number?
2. Count the number of items to be considered.
3. Determine how many votes each participant will get. If there will be several rounds of voting, participants might get more than one vote in the earlier rounds. A rule of thumb that is often used is to divide the number of items to be voted on by 3. For example, if the team were voting on 12 items, each participant would get 4 votes (12 divided by 3).
4. Allow participants enough time to make their selections.
5. Conduct the vote using the desired method (secret ballot, show of hands, etc.).
6. Count the votes and rank order the team choices. The process may end at this point if there are clear choices. If not, or if the vote is close on several items, the process may be repeated until the right number of priorities (see step 1) have been identified.
Force-Field Analysis
Force-field analysis helps identify the driving or restraining forces that need to be considered before introducing change. Force-field analysis is more than simply identifying the pros and cons of a particular idea. It requires thoughtful analysis on the part of all participants to consider factors that go beyond the obvious.
Facilitators should follow these steps when using force-field analysis:
1. Draw a copy of the force-field analysis diagram on the flip-chart so everyone can see it. Some facilitators use two flip-charts—one for driving forces and one for restraining forces.
2. Give each participant a copy of the diagram.
3. Write the "problem" in the top box. This is a statement of the problem the team wants to solve. Get agreement from the team before continuing.
4. Write the "goal" in the second box. This should be a specific statement of what will be changed or different if the problem is solved.
5. Use the nominal group technique or brainstorming and have participants identify the driving forces that will help the goal to be achieved.
6. Use the nominal group technique or brainstorming and have participants identify the restraining forces that stand in the way of achieving the goal.
7. Rank order the driving forces.
8. Rank order the restraining forces.
9. Determine what can be done to capitalize on or increase the driving forces by using brainstorming or another tool.
10. Determine what can be done to reduce or eliminate the restraining forces by using brainstorming or another tool.
Cause-and-Effect Diagram
The cause-and-effect diagram, often referred to as a "fishbone" because of the way it looks, is used to identify possible causes for a particular problem (effect). Somewhat similar to the diagramming of sentences, the process visually depicts the relationships that exist among several causes. The fishbone is also useful because the team can subgroup causes under several key headings. Facilitators like it because it provides a graphic representation of a problem and its associated causes. This makes it is easier to see that there are multiple causes and also to see the relationship among the causes.
Here's how facilitators can use this problem analysis tool:
1. Draw a copy of the cause-and-effect diagram on the flip-chart so everyone can see it.
2. Give each participant a copy of the diagram.
3. Write the effect (problem) in the box that represents the "fish's" head.
4. Identify the categories you want to use for the causes. The most commonly used categories are methods, people, material, and equipment. Some facilitators add environment as a fifth category. Totally different categories may be useful depending on the nature of the problem. For example, some other useful categories might be customers, policies, procedures, and marketplace. Write the categories you want to use at the end of the "fish bones."
5. Brainstorm the causes for each category. As the team identifies possible causes, these are added as branches along the bones of the diagram. In some cases there may even be subcauses of the main causes. The objective is to identify the root cause(s) of the problem.
Storyboarding
Facilitators use storyboarding when they want team members to visualize a problem, a process, or possible solution to a problem. Instead of relying on words alone to describe a problem or situation (as in the previous techniques), storyboarding emphasizes the use of pictures or drawings.
Here are the steps to follow when using storyboarding as a facilitation tool:
1. Identify the issue or concept to be storyboarded. The first time story-boarding is used with a team it may be helpful to define the issue in more detail by identifying the specific events or tasks they are to storyboard.
2. Give each participant one or more sheets of flip-chart paper and colored markers. Or, give participants several index cards and have them draw one scene on each card.
3. Explain that the emphasis is on the issue not their drawing ability. Have participants begin their storyboard.
4. Have participants post their flip-chart page(s) on the wall. If they are using index cards, have them arrange the cards on a flipchart page and then post the page on the wall.
5. Have the participants explain their storyboard to the entire group. Allow for questions and discussion.
6. Reach agreement on the storyboard that best depicts the solution (not the best artwork). It might be necessary to combine scenes from several storyboards to come up with one that works for all participants.
7. Identify next steps in the process. What action is required to make the storyboard a reality or to solve the problem?
Small Groups
Small groups are used to increase involvement when the size of the entire group may inhibit participation by some members. In most cases, participants will open up when there are fewer people in the group. It is also difficult to "hide" in a small group when the expectation is that everyone will participate. Small groups are also useful when there are several issues to be addressed and time is limited. The small groups can be given an issue or problem to discuss and then report their findings back to the entire group.
Here's a typical way of using small groups:
1. Identify the topic(s) to be discussed.
2. Write the topic on the flip-chart. If there are multiple topics, consider writing each topic on a separate sheet of paper one topic can be given to each group.
3. Explain what the smaller groups are to do. Are they to come up with recommendations? solutions?
4. Let the participants know how much time they will have to work on their assignment.
5. Divide the overall team into smaller groups. The best size for small groups is 5 to 7 people. There are several ways to determine group make up. The easiest way is to have people count off and put all the 1's in a group, all the 2's in a group, and so on. Another way is to randomly distribute colored index cards and have participants with the same color cards make a small group. In some cases, the group members may be hand-picked because of their expertise on the topic being discussed. If the same facilitation assignment lends itself to frequently using small groups, consider changing the group makeup periodically so a group does not become stagnant.
6. Direct each group to select a spokesperson and a recorder.
7. Monitor the time. Stick to the time limit given at the beginning. As the groups are working, move from group to group and be available to answer questions. While moving about, also keep participants informed of how much time they have left.
8. Bring all the small groups back together.
9. Have a spokesperson from each group report on what they accomplished.
10. Allow other participants to ask questions of the spokesperson or other group members.
Data Gathering
Data gathering is a tool that is used outside the team session to prepare information to use during team meetings. The data gathered can be critical when it comes time to make decisions. Effective facilitators know that decision making without any facts or data can be disastrous. They understand that it may not be possible to have all the data needed, but they still make an effort to gather as much information as possible before asking the team to make a decision. The information is then presented to the group and becomes one of the factors to be considered when making decisions and evaluating courses of action.
Some of the more common techniques are these:
? Personal interviews, which involve obtaining information in a one-on-one conversation so that the information is not influenced by other people. This can be a lengthy process depending on the number of people to be interviewed.
? Review of financial reports, which involves looking at the financial implications of decisions. A potential drawback is that sometimes the financial information can be "old" news because it reflects a time period already past,
? Review of statistical reports, which involves looking at other factors besides personal opinions and financial data. However, as with financial reports, sometimes the information is "old" news.
? Questionnaires and surveys, which are ways to gather feedback from many people in a short period of time. Questionnaires can either be signed or anonymous depending on the wishes of the team. The number of surveys will affect how long it takes to compile the results.
? Focus groups, or other opinion-testing groups outside of the team, can share their ideas and provide the team with feedback. Several people from the same department within the organization can provide valuable insight by sharing their points of view. A group made up of some of the organization's customers can provide interesting information about products or services. However, compiling usable data can be difficult if there are a wide variety of opinions.
? Observation involves examining the way a task is being performed to identify possible problems. This process can take more time than other forms of data gathering. Also, the fact that someone is observing can affect the way the person does the job. However, it is a very good method for gathering data first-hand.
For more Information:
* Effective Facilitation Skills, People Skills, Communication Skills *
Facilitation Tool Best Use
=========== ==========
Brainstorming Many ideas are needed in a short period of time.
Team input is important.
Ideas need to be generated prior to using other tools.
Nominal Group Technique Involvement from all team members is needed.
A new assignment is beginning.
Rank Ordering Alternatives must be narrowed down in number.
Force-Field Analysis Driving and restraining forces to change need to be identified.
Cause-and- Effect Diagram (Fishbone) Various causes of a particular problem need to be identified. The relationships among the causes need to be visualized.
Storyboarding The problem, process, or possible solution should be visualized.
Small Groups Increased involvement is needed. Multiple issues need to be solved in a minimum amount of time.
Data Gathering Information about the current situation is needed.
Results of efforts need to be evaluated.
Brainstorming
Brainstorming appeals to facilitators because it:
? Encourages a high degree of involvement by participants
? Gets the energy of the team flowing
? Requires few props (a flip-chart and markers)
? Allows a lot to be accomplished in a short period of time
? Can be fun
Successful brainstorming efforts follow these steps:
1. Explain the purpose of the session. What's the issue to be addressed or the problem to be discussed?
2. Set up a flip-chart and select another person to be the recorder. If a lot of ideas are anticipated, consider using multiple flip-charts and multiple recorders.
3. Write the issue or problem to be discussed on a flip-chart page or marker board where everyone can see it.
4. Review the following ground rules:
a. Specify time restraints.
b. Explain that the goal is to go for a quantity of ideas—not quality at this stage.
c. Encourage people to free-wheel and not to hold back. Sometimes the crazier the ideas sound, the better.
d. Do not evaluate, make judgments, or criticize what someone says.
e. Explain that it is okay to ask questions to clarify, but not to debate.
f. When silence occurs, wait and then continue. Many good ideas will flow after people get a second wind.
5. Conduct the brainstorming session and stick to the ground rules. When the time limit has been reached, call the session to a halt.
6. Review and combine ideas. Only at this point is it okay for participants to become more discerning about the quality of the ideas that have been suggested. Go back through each idea and eliminate unrealistic or incompatible ideas. Assign some kind of label to the other ideas. For example, use an "M" for ideas that "may be" considered; use an asterisk for the ones that definitely are to be considered.
7. Review the ideas that are left and combine those that are similar.
8. The last step depends on the objective. In some cases, the team may develop an action plan based on the ideas that have been generated. In other cases, the ideas may be turned over to another team or a smaller work team who has the responsibility of using the ideas.
The Nominal Group Technique
The nominal group technique is related to brainstorming and is used when facilitators want to ensure involvement from all team members. It is a useful technique at the beginning of a facilitation assignment when participants can be reluctant to express themselves because they are not yet comfortable with their role in the process. The nominal group technique can also be used to prepare the team for full-scale brainstorming or prior to using rank ordering.
The nominal group technique involves these steps:
1. Identify the topic, issue, or problem to be addressed.
2. Have participants write their ideas about the topic on a piece of paper, in private, without consulting other participants. You can direct them to write down a specific number of ideas or ask them to write down as many as they can think of at the time.
3. Go around the room and ask each participant, in round-robin fashion, to give one idea.
4. Each person must share an idea unless it has already been given by someone else. In this case the participant would "pass."
5. Record the ideas on the flip-chart as they are given.
6. Allow no discussion or debate of the ideas at this point.
7. Continue in a round-robin manner until all ideas have been given.
8. Once all the participants have given their ideas, either stop the process (if no more information is needed) or open it up for more discussion by using brainstorming.
Rank Ordering
Rank ordering is a tool that can help a facilitation team sort through a great deal of information and identify the priorities. The process involves taking one or more votes to narrow the number of options for the team. As the rank-order process continues, the items that are most important to the team begin to emerge and the less important items are eliminated. Facilitators might use rank ordering immediately after a brainstorming session. For example, the team has generated many good ideas, but they can only act on a few. Rank ordering allows the team to identify the critical few that need to be addressed.
Rank Ordering works like this:
1. Determine how many items or priorities need to be selected. Is the objective to select only one item, the top three choices, or some other number?
2. Count the number of items to be considered.
3. Determine how many votes each participant will get. If there will be several rounds of voting, participants might get more than one vote in the earlier rounds. A rule of thumb that is often used is to divide the number of items to be voted on by 3. For example, if the team were voting on 12 items, each participant would get 4 votes (12 divided by 3).
4. Allow participants enough time to make their selections.
5. Conduct the vote using the desired method (secret ballot, show of hands, etc.).
6. Count the votes and rank order the team choices. The process may end at this point if there are clear choices. If not, or if the vote is close on several items, the process may be repeated until the right number of priorities (see step 1) have been identified.
Force-Field Analysis
Force-field analysis helps identify the driving or restraining forces that need to be considered before introducing change. Force-field analysis is more than simply identifying the pros and cons of a particular idea. It requires thoughtful analysis on the part of all participants to consider factors that go beyond the obvious.
Facilitators should follow these steps when using force-field analysis:
1. Draw a copy of the force-field analysis diagram on the flip-chart so everyone can see it. Some facilitators use two flip-charts—one for driving forces and one for restraining forces.
2. Give each participant a copy of the diagram.
3. Write the "problem" in the top box. This is a statement of the problem the team wants to solve. Get agreement from the team before continuing.
4. Write the "goal" in the second box. This should be a specific statement of what will be changed or different if the problem is solved.
5. Use the nominal group technique or brainstorming and have participants identify the driving forces that will help the goal to be achieved.
6. Use the nominal group technique or brainstorming and have participants identify the restraining forces that stand in the way of achieving the goal.
7. Rank order the driving forces.
8. Rank order the restraining forces.
9. Determine what can be done to capitalize on or increase the driving forces by using brainstorming or another tool.
10. Determine what can be done to reduce or eliminate the restraining forces by using brainstorming or another tool.
Cause-and-Effect Diagram
The cause-and-effect diagram, often referred to as a "fishbone" because of the way it looks, is used to identify possible causes for a particular problem (effect). Somewhat similar to the diagramming of sentences, the process visually depicts the relationships that exist among several causes. The fishbone is also useful because the team can subgroup causes under several key headings. Facilitators like it because it provides a graphic representation of a problem and its associated causes. This makes it is easier to see that there are multiple causes and also to see the relationship among the causes.
Here's how facilitators can use this problem analysis tool:
1. Draw a copy of the cause-and-effect diagram on the flip-chart so everyone can see it.
2. Give each participant a copy of the diagram.
3. Write the effect (problem) in the box that represents the "fish's" head.
4. Identify the categories you want to use for the causes. The most commonly used categories are methods, people, material, and equipment. Some facilitators add environment as a fifth category. Totally different categories may be useful depending on the nature of the problem. For example, some other useful categories might be customers, policies, procedures, and marketplace. Write the categories you want to use at the end of the "fish bones."
5. Brainstorm the causes for each category. As the team identifies possible causes, these are added as branches along the bones of the diagram. In some cases there may even be subcauses of the main causes. The objective is to identify the root cause(s) of the problem.
Storyboarding
Facilitators use storyboarding when they want team members to visualize a problem, a process, or possible solution to a problem. Instead of relying on words alone to describe a problem or situation (as in the previous techniques), storyboarding emphasizes the use of pictures or drawings.
Here are the steps to follow when using storyboarding as a facilitation tool:
1. Identify the issue or concept to be storyboarded. The first time story-boarding is used with a team it may be helpful to define the issue in more detail by identifying the specific events or tasks they are to storyboard.
2. Give each participant one or more sheets of flip-chart paper and colored markers. Or, give participants several index cards and have them draw one scene on each card.
3. Explain that the emphasis is on the issue not their drawing ability. Have participants begin their storyboard.
4. Have participants post their flip-chart page(s) on the wall. If they are using index cards, have them arrange the cards on a flipchart page and then post the page on the wall.
5. Have the participants explain their storyboard to the entire group. Allow for questions and discussion.
6. Reach agreement on the storyboard that best depicts the solution (not the best artwork). It might be necessary to combine scenes from several storyboards to come up with one that works for all participants.
7. Identify next steps in the process. What action is required to make the storyboard a reality or to solve the problem?
Small Groups
Small groups are used to increase involvement when the size of the entire group may inhibit participation by some members. In most cases, participants will open up when there are fewer people in the group. It is also difficult to "hide" in a small group when the expectation is that everyone will participate. Small groups are also useful when there are several issues to be addressed and time is limited. The small groups can be given an issue or problem to discuss and then report their findings back to the entire group.
Here's a typical way of using small groups:
1. Identify the topic(s) to be discussed.
2. Write the topic on the flip-chart. If there are multiple topics, consider writing each topic on a separate sheet of paper one topic can be given to each group.
3. Explain what the smaller groups are to do. Are they to come up with recommendations? solutions?
4. Let the participants know how much time they will have to work on their assignment.
5. Divide the overall team into smaller groups. The best size for small groups is 5 to 7 people. There are several ways to determine group make up. The easiest way is to have people count off and put all the 1's in a group, all the 2's in a group, and so on. Another way is to randomly distribute colored index cards and have participants with the same color cards make a small group. In some cases, the group members may be hand-picked because of their expertise on the topic being discussed. If the same facilitation assignment lends itself to frequently using small groups, consider changing the group makeup periodically so a group does not become stagnant.
6. Direct each group to select a spokesperson and a recorder.
7. Monitor the time. Stick to the time limit given at the beginning. As the groups are working, move from group to group and be available to answer questions. While moving about, also keep participants informed of how much time they have left.
8. Bring all the small groups back together.
9. Have a spokesperson from each group report on what they accomplished.
10. Allow other participants to ask questions of the spokesperson or other group members.
Data Gathering
Data gathering is a tool that is used outside the team session to prepare information to use during team meetings. The data gathered can be critical when it comes time to make decisions. Effective facilitators know that decision making without any facts or data can be disastrous. They understand that it may not be possible to have all the data needed, but they still make an effort to gather as much information as possible before asking the team to make a decision. The information is then presented to the group and becomes one of the factors to be considered when making decisions and evaluating courses of action.
Some of the more common techniques are these:
? Personal interviews, which involve obtaining information in a one-on-one conversation so that the information is not influenced by other people. This can be a lengthy process depending on the number of people to be interviewed.
? Review of financial reports, which involves looking at the financial implications of decisions. A potential drawback is that sometimes the financial information can be "old" news because it reflects a time period already past,
? Review of statistical reports, which involves looking at other factors besides personal opinions and financial data. However, as with financial reports, sometimes the information is "old" news.
? Questionnaires and surveys, which are ways to gather feedback from many people in a short period of time. Questionnaires can either be signed or anonymous depending on the wishes of the team. The number of surveys will affect how long it takes to compile the results.
? Focus groups, or other opinion-testing groups outside of the team, can share their ideas and provide the team with feedback. Several people from the same department within the organization can provide valuable insight by sharing their points of view. A group made up of some of the organization's customers can provide interesting information about products or services. However, compiling usable data can be difficult if there are a wide variety of opinions.
? Observation involves examining the way a task is being performed to identify possible problems. This process can take more time than other forms of data gathering. Also, the fact that someone is observing can affect the way the person does the job. However, it is a very good method for gathering data first-hand.
For more Information:
* Effective Facilitation Skills, People Skills, Communication Skills *
0 comments:
Post a Comment
Place Your Comments Here